10-String Guitar
This guitar was a recent commission for a customer who already has a 10-string but wanted something a little different. The tuning is the same as a standard guitar from the 1st to the 5th strings, but then the bass strings are tuned diatonically with the lowest at C - i.e. C2/D2/E2/F2/G2/A2/D3/G3/B3/E4
The guitar is also unusual in having fanned frets, also known as a multi-scale guitar. This allows for a slightly better match of the string length to the pitch of each string. The scale of the first string is 620mm, and the 10th string is 650mm.
One of the challenges faced with this guitar was making it both easy (relatively) to pay, and aesthetically pleasing as well. The required width of the fingerboard tends to make most 10-string guitars look rather chunky and neck-heavy, and the head in particular can look very wide and quite ugly. I came up with a design for the head, which along with some tapering of the fingerboard above the 12th fret on the bas side helped to give the guitar a more elegant look. A new design for the bridge and an armrest completed a contemporary look for the instrument.
The soundboard is spruce, and the back and sides rosewood. The neck is cedrela with 2 carbon fibre reinforcing bars below the fingerboard. The fingerboard is ebony, as are the friction tuning pegs.








James Lister Luthiery
© 2026 James Lister Luthiery. Established 2001.
